Giường bệnh nhân đa năng điều khiển cơ

Hydraulic bed, 4-section, 3 of which jointed and 1 fixed centrally. Mattress platform made of thermoformed ABS, easy to be removed and cleaned, with round edges and integrated mattress stoppers. Base frame of epoxy-coated steel pipes to be equipped with wheels. The bed intermediate frame of epoxy-coated steel pipes supporting the mattress platform can host either, swing-down, sliding-rail or 4 section safety sides;  on both sides of the intermediate frame there is an accessory/drainage-holder metal bar with 4 mobile sliding plastic hooks, each one with a 3 kg capacity. Frame provided with proper housings for patient lifting pole and I.V. poles at the 4 corners. Plastic bumper wheels protect the four corners of the bed. During adjustment, the roto-translating backrest automatically shifts backwards to compensate patient pressure on the mattress: this allows to avoid continuous repositioning of the patient on the bed , to reduce the pressure on the plexus/pelvis areas to enhance breathing and to make the patient posture significantly more comfortable. By roto-translation the backrest shifts 11 cm backwards. Height adjustment performed by foot -operated hydraulic actuator with pedals on both sides of the bed, for a maximum lifting load of 220 kg. Backrest and footrest can be adjusted by gas springs controls with gradual release, hand-operated by levers located on both sides of the bed. The footrest area is manually adjustable through teeth racks and features a mechanical safety control to avoid incorrect angles/counter rotations of the knee. The bed ends are embedded in dedicated receptacles with a safety lock preventing pulling-away, that can be unlocked by small levers integrated in the structure Epoxy powders coating finish, with antibacterial additive BioCote, based on silver ions, enhancing sanitising. MEDICAL DEVICE, CLASS I, IN COMPLIANCE WITH EU DIRECTIVE 93/42/CEE, REVISED BY DIRECTIVE 200/47/CE. APPLIED TECHNICAL NORMES: CEI EN 60601-1; UNI CEI EN 60601-2-52. The bed is realized according to the production process in compliance with ISO certification ISO 9001 and 13485. CND CODE Y181207. REPERTORIO D.M. N. 999639/R